Noise Engineering Bin Seq Eurorack 8 Step Gate Sequencer Module
Noise Engineering Bin Seq - 8 Step Gate Sequencer
The Noise Engineering Bin Seq is an eight-step switchable gate sequencer. Each switch has three positions: off, tied gate or short gate. Reset in allows you to make the sequence as short as you want. Ideal for creating and manipulating rhythmic sequences in live sets.
Interface
• Time - 8 switches that control whether a gate is output at each clock step. Each switch has three positions: to the left is off, in the middle is a short gate, where the gate remains high only until the clock falls. To the right is long, or tied gate, where Bin Seq ties the beat to the next one
• Beat - Clock input. Advances the current step on a rising edge
• Measure - Optional clock input to indicate the start of a measure. Acts as a reset to restart Bin Seq at the beginning of the pattern
• Advance (Adv) - Momentary button to manually advance the step. Works with or without a clock signal being present
• Reset (Rst) - Momentary button to manually reset the cycle. Works with or without a clock signal being present
• Out - Gate out
Specifications
| Width: | 4hp |
| Max Depth: | 20mm |
| Power: | +12V: +30mA |
| -12V: -8mA |