Blicken Synths New Account Special Special Offer. Get 10% off your first order!
Brexit: No additional charges to EU customers after the UK leaves on 31st January 2020 as a Transition Period is in place until 31st December 2020



DPW Design AV-1 Dual Attenuverter

AV-1 is a Eurorack format dual attenuverter with some extra functions. It can be used as a utility unit for control voltages or as an audio unit.

It has besides the obvious two attenuverter in and outputs a suming output with an attenuverter to get more complex signals. This sums the signals after the A and B attenuverters.

When nothing is connected to A or B you can set the output to +/- 5v DC. This way you could run an LFO through A, use B as a voltage offset and get the sum out on SUM.

The output A>B is a comparator output with a volume control. This can be used to trigger other units depending on what's coming out from A and B.

The A>B can also be used to make, for instance, a PWM signal out of a sinus in on A and an LFO in on B.

The A>B output is +/- 5v and a bit wave shaped so the square wave out should sound good if used for audio.

Next to each knob is a green / red LED showing the level and polarity of the output.

The green / red LED next to the A/B knob shows the signal before the red volume knob so you can see how the comparator reacts before turning up the volume.


Max Depth:25mm
Power:+12V: 45mA

-12V: 45mA

Write a review

Please login or register to review
  • Manufacturer: DPW Design
  • Product Code: AV-1
  • Availability: 2
  • £68.00
  • Exc VAT: £56.67


* E-Mail: